Product Big Image
  • #2962305
  • Manufacturer: APC
  • UPC #731304016304
  • Model #BK500
  • Battery Backup & Surge Protector for Electronics and Computers



    Accepting Back Orders
    Estimated to Ship By October 31, 2016

    Detail Description
    Detailed Description
    (Manufacturer # BK500 )

    • Building Wiring Fault Indicator
    • This LED informs users of potentially dangerous wiring problems in the wall circuit.
    • Cold-start capable
    • Provides temporary battery power when the utility power is out.
    • Dataline surge protection
    • Provides protection of connected equipment from power surges on the data lines.
    • Disconnected battery notification
    • Warns when a battery is not available to provide backup power.
    • Hot-swappable batteries
    • Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
    • Lifetime data recovery warranty
    • Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.
    • Serial connection
    • Use your PC to access additional power protection and management features for your UPS via a serial port.
    • Simple battery replacement
    • Increases UPS availability by allowing quick, easy battery replacement.
    • Transformer-block spaced outlets
    • Protect equipment with input transformer blocks without blocking access to other receptacles.
    • USB connection
    • Use your PC to access additional power protection and management features for your UPS via a USB Port.
    Back-UPSFeatures & Benefits
    • Surge only outlets
    • Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
    • Battery and surge protected outlets
    • Back up and protect your hardware and data during power outages, surges and spikes.
    • Battery failure notification
    • Provides early-warning fault analysis on batteries enabling timely preventive maintenance
    • Automatic self-test
    • Periodic battery self-test ensures early detection of a battery that needs to be replaced.
    • Intelligent battery management
    • Maximizes battery performance, life, and reliability through intelligent, precision charging.
    • Audible alarms
    • Provides notification of changing utility power and UPS power conditions
    • LED status display
    • Quickly understand unit and power status with visual indicators.
      Safety-agency approved
      Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
    Marketing Features
      Battery-protected and surge-only outlets
      Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
    Output power capacity 300Watts / 500VA
    Max Configurable Power (Watts) 300Watts / 500VA
    Nominal Output Voltage 120V
    Output Frequency (sync to mains) 50/60Hz +/- 3 Hz
    Topology Standby
    Waveform type Stepped approximation to a sinewave
    Number of Outlets 10
    Output Connections (3) NEMA 5-15R (Battery Backup)
    (3) NEMA 5-15R (selector_surgetitle)
    Transfer Time 8ms typical : 12ms maximum
    Nominal Input Voltage 120V
    Input frequency 50/60 Hz +/- 3 Hz (auto sensing)
    Input Connections NEMA 5-15P
    Cord Length 6ft ( 1.83meters)
    Input voltage range for main operations 98 - 140V
    Number of Power Cords 1
    Batteries & Runtime
    Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
    Typical recharge time 8hour(s)
    Replacement Battery RBC2
    Expected Battery Life (years) 4-6
    RBC Quantity 1
    Battery Volt-Amp-Hour Capacity 86
    Communications & Management
    Interface Port(s) Optional Simple Signalling RS232 cable , USB
    Control panel LED status display with On Line : On Battery : Replace Battery and Overload indicators
    Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
    Surge Protection and Filtering
    Surge energy rating 480Joules
    Data Line Protection Analog phone line for phone/fax/modem/DSL (RJ-11 connector)
    Filtering Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449
    Maximum Height 6.5inches ( 165mm , 16.5cm )
    Maximum Width 3.6inches ( 91mm , 9.1cm )
    Maximum Depth 11.2inches ( 284mm , 28.4cm )
    Net Weight 13.8lbs. ( 6.27kg )
    Color Beige
    Operating Environment 32 - 104 °F ( 0 - 40 °C )
    Operating Relative Humidity 0 - 95 %
    Operating Elevation 0-10000ft ( 0-3000meters)
    Storage Temperature -15 - 45 °C
    Storage Relative Humidity 0 - 95 %
    Storage Elevation 0-50000ft ( 0-15000meters )
    Audible noise at 1 meter from surface of unit 45.0dBA
    Online thermal dissipation 24.0BTU/hr
    What's in the Box
    • CD with software
    • Cord management straps
    • USB cable
    • User Manual


    In Stock, Same Business Day Shipping
    This product is in stock in our warehouse. You have a choice of Ground Service, 2nd Day Air, or Overnight Delivery for domestic orders.


    Confirm Availability using In-Store Pickup

    The most recent information shows that this
    product is in-stock at this location, but
    availability is subject to prior sale.
    Ensure availability by reserving this product
    with Free In-Store Pickup.


    Sold Out at this store location
    This product is currently sold out at this
    location. Click Change Store to see if it may
    be available for pick-up from another location.

    Show Big Images