Product Big Image
  • Frys.com #2962305
  • Manufacturer: APC
  • UPC #731304016304
  • Model #BK500
  • Battery Backup & Surge Protector for Electronics and Computers

     

     

    shipping_info
    In Stock
    Ships Same Business Day
    status_info
    store_pickup


    Detail Description
    Detailed Description
    (Manufacturer # BK500 )

    Features
    • Building Wiring Fault Indicator
    • This LED informs users of potentially dangerous wiring problems in the wall circuit.
    • Cold-start capable
    • Provides temporary battery power when the utility power is out.
    • Dataline surge protection
    • Provides protection of connected equipment from power surges on the data lines.
    • Disconnected battery notification
    • Warns when a battery is not available to provide backup power.
    • Hot-swappable batteries
    • Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
    • Lifetime data recovery warranty
    • Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.
    • Serial connection
    • Use your PC to access additional power protection and management features for your UPS via a serial port.
    • Simple battery replacement
    • Increases UPS availability by allowing quick, easy battery replacement.
    • Transformer-block spaced outlets
    • Protect equipment with input transformer blocks without blocking access to other receptacles.
    • USB connection
    • Use your PC to access additional power protection and management features for your UPS via a USB Port.
    Back-UPSFeatures & Benefits
    Protection
    • Surge only outlets
    • Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
    • Battery and surge protected outlets
    • Back up and protect your hardware and data during power outages, surges and spikes.
    Availability
    • Battery failure notification
    • Provides early-warning fault analysis on batteries enabling timely preventive maintenance
    • Automatic self-test
    • Periodic battery self-test ensures early detection of a battery that needs to be replaced.
    • Intelligent battery management
    • Maximizes battery performance, life, and reliability through intelligent, precision charging.
    Manageability
    • Audible alarms
    • Provides notification of changing utility power and UPS power conditions
    • LED status display
    • Quickly understand unit and power status with visual indicators.
    Safety
      Safety-agency approved
      Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
    Marketing Features
      Battery-protected and surge-only outlets
      Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
    Specifications
    Output
    Output power capacity 300Watts / 500VA
    Max Configurable Power (Watts) 300Watts / 500VA
    Nominal Output Voltage 120V
    Output Frequency (sync to mains) 50/60Hz +/- 3 Hz
    Topology Standby
    Waveform type Stepped approximation to a sinewave
    Number of Outlets 10
    Output Connections (3) NEMA 5-15R (Battery Backup)
    (3) NEMA 5-15R (selector_surgetitle)
    Transfer Time 8ms typical : 12ms maximum
    Input
    Nominal Input Voltage 120V
    Input frequency 50/60 Hz +/- 3 Hz (auto sensing)
    Input Connections NEMA 5-15P
    Cord Length 6ft ( 1.83meters)
    Input voltage range for main operations 98 - 140V
    Number of Power Cords 1
    Batteries & Runtime
    Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
    Typical recharge time 8hour(s)
    Replacement Battery RBC2
    Expected Battery Life (years) 4-6
    RBC Quantity 1
    Battery Volt-Amp-Hour Capacity 86
    Communications & Management
    Interface Port(s) Optional Simple Signalling RS232 cable , USB
    Control panel LED status display with On Line : On Battery : Replace Battery and Overload indicators
    Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
    Surge Protection and Filtering
    Surge energy rating 480Joules
    Data Line Protection Analog phone line for phone/fax/modem/DSL (RJ-11 connector)
    Filtering Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449
    Physical
    Maximum Height 6.5inches ( 165mm , 16.5cm )
    Maximum Width 3.6inches ( 91mm , 9.1cm )
    Maximum Depth 11.2inches ( 284mm , 28.4cm )
    Net Weight 13.8lbs. ( 6.27kg )
    Color Beige
    Environmental
    Operating Environment 32 - 104 °F ( 0 - 40 °C )
    Operating Relative Humidity 0 - 95 %
    Operating Elevation 0-10000ft ( 0-3000meters)
    Storage Temperature -15 - 45 °C
    Storage Relative Humidity 0 - 95 %
    Storage Elevation 0-50000ft ( 0-15000meters )
    Audible noise at 1 meter from surface of unit 45.0dBA
    Online thermal dissipation 24.0BTU/hr
    What's in the Box
    • CD with software
    • Cord management straps
    • USB cable
    • User Manual








    106

    In Stock, Same Business Day Shipping
    This product is in stock in our warehouse. You have a choice of Ground Service, 2nd Day Air, or Overnight Delivery for domestic orders.

    DISPLAY ITEM.

    Confirm Availability using In-Store Pickup

    The most recent information shows that this
    product is in-stock at this location, but
    availability is subject to prior sale.
    Ensure availability by reserving this product
    with Free In-Store Pickup.

    OPEN BOX ITEM.

    Sold Out at this store location
    This product is currently sold out at this
    location. Click Change Store to see if it may
    be available for pick-up from another location.

    Show Big Images