Product Big Image
  • Frys.com #6965377
  • Manufacturer: BOSS AUDIO
  • UPC #791489116466
  • Model #AR1600.4
    • 1600 W MAX Power 4 Channel
    • 300 W X 4 RMS @ 2 ohm
    • 150 W X 4 RMS @ 4 ohm
    • 600 W X 2 RMS Bridged @ 4 ohm
    • Full Range, Class A/B, MOSFET Power Supply
    • High and Low Level Inputs
    • Fixed High Pass Crossover, Variable Low Pass Crossover, Variable Bass Boost
    • Include Remote Subwoofer Control

     

     

    shipping_info
    In Stock
    Ships Same Business Day
    status_info
    While supplies last
    store_pickup


    Detail Description
    Detailed Description
    (Manufacturer # AR1600.4 )

    Features
    2 Ohm Stable
    The lowest impedance accepted by this amplifier is 2 ohms. Amplifiers that are 2 ohms stable produce more power resulting in more volume. This amp can comfortably power speakers or subwoofers with all channel(s) being used at a load of 2 ohms.
    Bridgeable
    Bridging an amplifier means to combine channels of a multi-channel amplifier to get more power or flexibility out of it. For instance, on a 4 channel amp, channels 1 and 2 could be used normally for your speakers, and channels 3 and 4 can be bridged for more power to a single subwoofer. A 2 channel amp can also be bridged to power a single subwoofer.
    Class A/B
    Class A/B amplifiers have long been known for their ability to produce great quality sound while performing more efficiently than pure Class A amplifiers. We have developed a specific linear circuitry that further reduces distortion while increasing both sound quality and power output.
    Fixed High Pass Filter
    Fixed High-pass filter gives you the ability to filter the frequencies that pass through to the full range speakers from a fixed frequency point.
    High and Low Level Inputs
    An amplifier with both high-level and low-level inputs provides flexibility by allowing you to build an audio system using virtually any standard factory or aftermarket source unit. High-level (speaker level) inputs accept the signal from the speakers, while low-level (RCA) inputs accept the signal from the pre-amp outputs of the source unit.
    MOSFET
    MOSFET stands for Metal Oxide Semiconductor Field-Effect Transistor. MOSFETs are used either as a switch or to amplify a signal. MOSFETs are superior to other FETs, because they require less current to operate, which makes them better suited for car audio.
    Protection
    If the amplifier gets too hot, the thermal protection circuit turns the amp off and allows the amp to cool down before turning it back on. If a speaker fails causing an electrical short, the protection circuit will automatically cut the output and remain in that state until the short is resolved. These safety features give you peace of mind knowing the amplifier is constantly monitoring conditions to protect itself.
    Subwoofer Level Control
    The ability to boost or attenuate the sub level when an amp and subwoofer are connected to the subwoofer pre-amp output.
    Variable Bass Boost
    Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
    Variable Gain Control
    Variable Gain Control lets you balance the amps output with the speakers or subs the amp is driving. To much gain will lead to distortion and to little will lead to clipping.
    Variable Low Pass Filter
    Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
    Specifications
    General Specs
    Amp Topology Full Range, Class A/B
    Power Supply Type MOSFET Power Supply
    Channel Configuration 4/3/2 Channel
    Performance Specs
    TOTAL POWER OUTPUT 1600 Watts
    PEAK POWER @ 2 Ω 400 Watts x 4
    PEAK POWER @ 4 Ω 200 Watts x 4
    BRIDGED POWER @ 4 Ω 800 Watts x 2
    RMS POWER @ 2 Ω 300 Watts x 4
    BRIDGED RMS POWER @ 4 Ω 600 Watts x 2
    RMS POWER @ 4 Ω 150 Watts x 4
    SPEAKER IMPEDANCE 2 to 8 Ω
    T.H.D. (TOTAL HARMONIC DISTORTION) 0.01 %
    CHANNEL SEPARATION≥ 90 dB
    S/N RATIO (A-WEIGHTED) 105 dB
    FREQUENCY RESPONSE 9 Hz to 50 kHz ±1 dB
    Connections, Controls, and Processing
    RCA INPUTS 4 Channel
    HIGH LEVEL INPUTS
    LOW PASS FILTER 35 Hz to 160 Hz
    HIGH-PASS FILTER Fixed Hz 200 Hz
    BASS BOOST Variable 0 to 18 dB
    SUBWOOFER LEVEL CONTROL
    THERMAL/OVERLOAD/SHORT PROTECTION
    Measurement
    LENGTH 12.3125"
    WIDTH 6.5"
    HEIGHT 2.5625"








    163

    In Stock, Same Business Day Shipping
    This product is in stock in our warehouse. You have a choice of Ground Service, 2nd Day Air, or Overnight Delivery for domestic orders.

    DISPLAY ITEM.

    Confirm Availability using In-Store Pickup

    The most recent information shows that this
    product is in-stock at this location, but
    availability is subject to prior sale.
    Ensure availability by reserving this product
    with Free In-Store Pickup.

    OPEN BOX ITEM.

    Sold Out at this store location
    This product is currently sold out at this
    location. Click Change Store to see if it may
    be available for pick-up from another location.

    Show Big Images