(Manufacturer # TX-NR717 )
Features |
High Fidelity Entertainment for Your Whole Home
With the power to fill large rooms with THX®-certified sound, this cutting-edge receiver is ready to integrate and distribute entertainment throughout your home. More than a home theater processor, the TX-NR717 allows you to access music on PC, stream from MP3tunes and Spotify, explore online radio, or connect your iPod®/iPhone® to one of two USB ports. You can distribute any of these various stereo sources to other rooms for house-wide entertainment. With a total of 10 HDMI® connections, this receiver converges HD content from all your components—even your smart phone media via a frontside MHL/HDMI—and provides easy input selection with InstaPrevue™ technology. HDMI also enables intuitive GUI with overlaid Quick Set-Up menu. Visually managing settings and playback—even across multiple zones—is easy with the Onkyo Remote App for iPhone and Android phones. Video upscaling to 4K, Audyssey DSX® seven-channel sound expansion, and Audyssey 2EQ® room correction are all included. Sound quality is quite simply the best in class, with powerful WRAT amplifier, three-stage inverted Darlington circuitry, and discrete output stage components delivering an otherworldly entertainment experience. |
|
                              |
Product Views |
 |
Specifications |
| Amplifier
|
| Power Output |
- |
| All Channels |
125 W (6 ohms, 1 kHz,
0.7%, 2 channels driven) |
| Front L/R |
110 W (8 ohms, 20 Hz-20 kHz,
0.08%, 2 channels driven, FTC)
125 W + 125 W (6 ohms, 1 kHz, 0.7%,
2 channels driven, FTC) |
| Center |
110 W (8 ohms, 20 Hz-20 kHz,
0.08%, 2 channels driven, FTC)
125 W (6 ohms, 1 kHz, 0.7%,
2 channels driven, FTC) |
| Surround L/R |
110 W (8 ohms, 20 Hz-20 kHz,
0.08%, 2 channels driven, FTC)
125 W + 125 W (6 ohms, 1 kHz, 0.7%,
2 channels driven, FTC) |
| Surround Back L/R |
110 W (8 ohms, 20 Hz-20 kHz,
0.08%, 2 channels driven, FTC)
125 W + 125 W (6 ohms, 1 kHz, 0.7%,
2 channels driven, FTC) |
| Dynamic Power |
250 W (3 ohms, 1 ch)
220 W (4 ohms, 1 ch)
130 W (8 ohms, 1 ch) |
| THD+N (Total Harmonic Distortion + Noise) |
0.08% (20 Hz-20 kHz, Rated power) |
| Damping Factor |
60 (Front, 1 kHz, 8 ohms) |
| Input Sensitivity and Impedance |
200 mV/47 k-ohms (Line)
2.5 mV/47 k-ohms (Phono MM) |
| Output Level and Impedance |
200 mV/470 ohms (Line out) |
| Phono Overload |
70 mV (MM, 1 kHz, 0.5%) |
| Frequency Response |
5 Hz-100 kHz/+1 dB, -3 dB (DSP bypass) |
| Tone Control |
±10 dB, 50 Hz (Bass)
±10 dB, 20 kHz (Treble) |
| Signal-to-Noise Ratio |
106 dB (Line, IHF-A)
80 dB (Phono MM, IHF-A) |
| Speaker Impedance |
4 Ohms?16 Ohms or 6 Ohms?16 Ohms |
| # Channels |
7.2 |
| Power Watts/ch |
110W (8ohms 20-20kHz, 0.08%, 2 Channels Driven, FTC) |
| Power (8ohms 20-20kHz 0.05%) /Ch |
- |
| THX Certified |
Select2 Plus |
| Continuous 6ohms Rated |
Yes |
| Certified 4ohms performance |
Yes |
| All Discrete Circuitry |
Yes |
| 3-Stage Inverted Darlington Circuitry |
Yes |
| PUSH-PULL Design |
- |
| Independent Block Construction (Amp/Preprocessor) |
- |
| Toroidal Transformer |
- |
| Independent Power Supply |
- |
| Bi-amp Capability For Front |
Yes |
| BTL Capability For Front |
- |
| Input Sensitivity/Output Level and Impedance |
- |
| Video |
1 Vp-p/75 ohms (Component)
0.7 Vp-p/75 ohms (Component PB/CB, PR/CR)
1 Vp-p/75 ohms (Composite) |
| Component Video Frequency Response |
5 Hz?100 MHz, -3dB |
| Tuning Frequency Range |
- |
| FM |
87.5 MHz?107.9 MHz |
| AM |
530 kHz?1,710 kHz |
| FM/AM Preset Memory |
40 stations |
|
Processing
|
| DOLBY Decoder |
True HD, DD Plus, PLIIz |
| DTS Decoder |
DTS-HD Master Audio |
| Dolby PLIIz |
Yes |
| ONKYO GAME Surround Modes |
Yes |
| DTS Surround Sensation Speaker / Headphone |
- / - |
| Neural Surround |
- |
| THX Processing Mode |
Yes |
| Audyssey DSX |
Yes |
| Audyssey Dynamic EQ |
Yes |
| Audyssey Dynamic Volume |
Yes |
| Direct/Pure Mode |
Yes / - |
| Music Optimizer |
Yes (Advanced) |
| 192K/24 Bit DACs |
Yes (Burr-Brown) |
| VLSC |
- |
| isf Certified Calibration Control |
- |
|
Connectivity
|
| Audio I/O |
6 / 1 |
| Phono Input |
Yes |
| Digital Audio IN (OPT/COAX) |
2 / 3 |
| Digital Audio OUT (OPT/COAX) |
- |
| Composite I/O |
5 / 1 |
| S-Video I/O |
- / - |
| Component Video I/O |
2 / 1 |
| Front-Panel A/V |
V |
| Front-Panel Optical |
- |
| USB Input |
Front (made for iPod/iPhone) and Rear |
| HDMI I/O |
8 (7 + 1)/ 2 |
| HDMI Version |
V1.4a (supports 3D video and Audio Return Channel) |
| Component Video Upconversion |
- |
| Analog To HDMI Upconversion |
Yes |
| 1080p Upscaling |
Yes (Marvell Qdeo) |
| 4K (up to 4096 x 2160) Upscaling |
Yes (Marvell Qdeo) |
| Multi-Channel Input |
- |
| Analog Pre-Outs |
7.2 |
| Speaker A/+B |
- |
| Powered Zone2 |
Yes |
| Powered Zone3 |
Yes |
| Zone 2 Line Out |
Yes |
| Zone 2 Video Out |
- |
| Zone 3 Line Out |
Yes |
| U-Port |
- |
| iPod Ready |
Yes (direct USB input) |
| HD Radio Ready |
- |
| Internet Radio Capable |
Yes (vTuner, Pandora, Spotify, Rhapsody, Sirius/XM iRadio, Slacker, LastFM iRadio, Aupeo, MP3tunes) |
| Streaming Audio From PC |
Yes |
| Streaming Audio From USB memory |
Yes |
| Wireless Network Ready via USB |
Yes (optional UWF-1) |
| PC Input (15 pin D-sub) |
Yes |
|
Integration Access
|
| RS-232 |
- |
| IR Input |
Yes |
| Ethernet |
Yes |
| ONKYO-RI System Control |
Yes |
| 12V Trigger |
Yes (zone 2) |
|
General
|
| Pre-Pro/Learning Remote |
Yes / - |
| Back-Lit Remote |
- |
| On Screen Remote Programming |
Yes |
| Bi-directional Remote Setup via GUI |
- |
| Activity Based Remote |
- |
| Color-Coded Speaker Terminals |
Yes |
| Auto Speaker Calibration W/Mic. |
Yes (Audyssey 2EQ) |
| OSD Out |
Yes(advanced "Home" GUI) |
| Solid Aluminum Front |
- |
| Power Supply |
AC 120 V, 60 Hz |
| Power Consumption |
6.8A |
| Standby Power Consumption |
0.1W |
| Dimensions (W x H x D) |
17 1/8" x 6 7/8" x 14 15/16" (435 x 174 x 379 mm) |
| Weight |
26.7 lbs (12.1 kg) |
| Warranty |
2 YEARS |
|
Documentation |
|
|
