(Manufacturer # TX-NR818 )
Features |
High-End Home Theater Performance Starts Here
This Onkyo network receiver is a winner in three areas. Firstly, its video performance is unrivalled. An HQV® Vida™ VHD1900 processor upscales content to 1080p, with Qdeo™ technology taking full HD out to an eye-popping 4K. An ISF system calibrates video from all inputs to industry standards, and the resulting picture is spectacular. Secondly, audio performance is unmatched, as proven by THX® Select2 Plus™ certification. The receiver delivers power effortlessly through three-stage inverted Darlington circuitry and 192 kHz/24-bit DACs. Finally, you get more setup flexibility. There are eight HDMI® inputs—including an MHL for smart phones—and two outputs. Two USB ports connect iPod®/iPhone® and LAN adaptor, enabling wireless PC and online audio. Three mind-blowing sound expansion systems are included—Audyssey DSX®, DTS Neo:X™, and Dolby® Pro Logic® IIz—assisted by Audyssey MultEQ XT32 room correction. Digital crossover processing, front channel bi-amping capability, and three-zone audio distribution grant the freedom to customize. With new InstaPrevue™ input selection technology and intuitive system control via iPhone and Android phone, now is the time to upgrade to an Onkyo. |
|
                              |
Product Views |
 |
Specifications |
| Amplifier
|
| # Channels |
7.2 |
| Power Watts/ch |
135W (8ohms 20-20kHz, 0.08%, 2 Channels Driven, FTC) |
| Power (8ohms 20-20kHz 0.05%) /Ch |
- |
| THX Certified |
Select2 Plus |
| Continuous 6ohms Rated |
Yes |
| Certified 4ohms performance |
Yes |
| All Discrete Circuitry |
Yes |
| 3-Stage Inverted Darlington Circuitry |
Yes |
| PUSH-PULL Design |
- |
| Independent Block Construction (Amp/Preprocessor) |
Yes |
| Toroidal Transformer |
- |
| Independent Power Supply |
- |
| Bi-amp Capability For Front |
Yes |
| BTL Capability For Front |
- |
| Digital Crossover Processing Network |
- |
| Power Output |
- |
| All Channels |
135 W (8 ohms, 20 Hz-20 kHz,
0.08%, 2 channels driven, FTC) |
| Front L/R |
135 W (8 ohms, 20 Hz-20 kHz,
0.08%, 2 channels driven, FTC)
125 W + 125 W (6 ohms, 1 kHz, 0.7%,
2 channels driven, FTC) |
| Center |
135 W (8 ohms, 20 Hz-20 kHz,
0.08%, 2 channels driven, FTC)
125 W + 125 W (6 ohms, 1 kHz, 0.7%,
2 channels driven, FTC) |
| Surround L/R |
135 W (8 ohms, 20 Hz-20 kHz,
0.08%, 2 channels driven, FTC)
125 W + 125 W (6 ohms, 1 kHz, 0.7%,
2 channels driven, FTC) |
| Surround Back L/R |
135 W (8 ohms, 20 Hz-20 kHz,
0.08%, 2 channels driven, FTC)
125 W + 125 W (6 ohms, 1 kHz, 0.7%,
2 channels driven, FTC) |
| Dynamic Power |
300 W (3 ohms, 1 ch)
250 W (4 ohms, 1 ch)
150 W (8 ohms, 1 ch) |
| THD+N (Total Harmonic Distortion + Noise) |
0.08% (20 Hz-20 kHz, Rated power) |
| Damping Factor |
60 (Front, 1 kHz, 8 ohms) |
| Input Sensitivity and Impedance |
200 mV/47 k-ohms (Line)
2.5 mV/47 k-ohms (Phono MM) |
| Output Level and Impedance |
200 mV/470 ohms (Line out) |
| Phono Overload |
70 mV (MM, 1 kHz, 0.5%) |
| Frequency Response |
5 Hz-100 kHz/+1 dB, -3 dB (DSP bypass) |
| Tone Control |
±10 dB, 50 Hz (Bass)
±10 dB, 20 kHz (Treble) |
| Signal-to-Noise Ratio |
110 dB (Line, IHF-A)
80 dB (Phono MM, IHF-A) |
| Speaker Impedance |
4 Ohms?16 Ohms or 6 Ohms?16 Ohms |
| Input Sensitivity/Output Level and Impedance |
- |
| Video |
1 Vp-p/75 ohms (Component)
0.7 Vp-p/75 ohms (Component PB/CB, PR/CR)
1 Vp-p/75 ohms (Composite) |
| Component Video Frequency Response |
5 Hz?100 MHz, -3dB |
| Tuning Frequency Range |
- |
| FM |
87.5 MHz?107.9 MHz |
| AM |
530 kHz?1,710 kHz |
| FM/AM Preset Memory |
40 stations |
|
Processing
|
| DOLBY Decoder |
True HD, DD Plus, PLIIz |
| DTS Decoder |
DTS-HD Master Audio, DTS-HD Express |
| Dolby PLIIz |
Yes |
| ONKYO GAME Surround Modes |
Yes |
| THX Processing Mode |
Yes |
| Audyssey DSX |
Yes |
| Audyssey Dynamic EQ |
Yes |
| Audyssey Dynamic Volume |
Yes |
| Direct/Pure Mode |
Yes / - |
| Music Optimizer |
Yes (Advanced) |
| 192K/24 Bit DACs |
Yes (Burr-Brown) |
| VLSC |
- |
| isf Certified Calibration Control |
Yes |
|
Connectivity
|
| Audio I/O |
7 / 1 |
| Phono Input |
Yes |
| Digital Audio IN (OPT/COAX) |
2 / 3 |
| Digital Audio OUT (OPT/COAX) |
- |
| Composite I/O |
5 / 1 |
| S-Video I/O |
- / - |
| Component Video I/O |
2 / 1 |
| Front-Panel A/V |
V |
| Front-Panel Optical |
- |
| USB Input |
Front (made for iPod/iPhone) and Rear |
| HDMI I/O |
8 (7 + 1)/ 2 |
| HDMI Version |
V1.4a (supports 3D video and Audio Return Channel) |
| Component Video Upconversion |
- |
| Analog To HDMI Upconversion |
Yes |
| 1080p Upscaling |
Yes (Marvell Qdeo) |
| 4K (up to 4096 x 2160) Upscaling |
Yes (Marvell Qdeo) |
| Multi-Channel Input |
- |
| Analog Pre-Outs |
9.2 |
| Speaker A/+B |
- |
| Powered Zone2 |
Yes |
| Powered Zone3 |
Yes |
| Zone 2 Line Out |
Yes |
| Zone 2 Video Out |
- |
| Zone 3 Line Out |
Yes |
| U-Port |
- |
| iPod Ready |
Yes (direct USB input) |
| HD Radio Ready |
- |
| Internet Radio Capable |
Yes (vTuner, Pandora, Spotify, Rhapsody, Sirius/XM iRadio, Slacker, LastFM iRadio, Aupeo, MP3tunes) |
| Streaming Audio From PC |
Yes |
| Streaming Audio From USB memory |
Yes |
| Wireless Network Ready via USB |
Yes (optional UWF-1) |
| PC Input (15 pin D-sub) |
Yes |
|
Integration Access
|
| RS-232 |
Yes |
| IR Input |
Yes |
| Ethernet |
Yes |
| ONKYO-RI System Control |
Yes |
| 12V Trigger |
Yes (zone 2/3) |
|
General
|
| Pre-Pro/Learning Remote |
Yes / Yes |
| Back-Lit Remote |
- |
| On Screen Remote Programming |
Yes |
| Bi-directional Remote Setup via GUI |
Yes |
| Activity Based Remote |
Yes |
| Color-Coded Speaker Terminals |
Yes |
| Auto Speaker Calibration W/Mic. |
Yes (Audyssey MultiEQXT32) |
| OSD Out |
Yes (advanced "Home" GUI) |
| Solid Aluminum Front |
- |
| Power Supply |
AC 120 V, 60 Hz |
| Power Consumption |
8.1A |
| Standby Power Consumption |
0.1W |
| Dimensions (W x H x D) |
17 1/8" x 7 13/16" x 17 1/8" (435 x 198.5 x 435.5 mm) |
| Weight |
40.3 lbs (18.3 kg) |
| Warranty |
2 YEARS |
|
Documentation |
|
|
