Product Big Image
  • #4908991
  • Manufacturer: Triplett
  • UPC #614395001124
  • Model #3399
  • The New Hound 3 Probe features 2 Bright, White LED Headlights that will help light your way in dark areas or reduce fluorescent light noise by allowing you to turn off overhead lighting. Shielded design to suppress "Feedback Squeal". Streamlined two tone generator design allows for better access in hard-to-reach areas. Adjustable volume / sensitivity control. Conductive Duck-Bill Tip for safe, easy penetration in cable bundles. Metal tip also included. LED gets brighter as the signal gets stronger. Two tone generator contains a high-gain, hi-impedance amplifier. Low voltage tone generator is capable of identifying any of the Fox's tone up to 12" away Rugged, moisture resistant, mylar cone speaker Use with the Fox, Fox2, or Wiremaster XR-2 tone generators for quick and efficient wire tracing Powered by a standard 9V battery (not included) with an easy access door. 1-year limited manufacturer warranty



    In Stock
    Ships Today

    Detail Description
    Detailed Description
    (Manufacturer # 3399 )

    Premium Tone & Probe Kit with adjustable sensitivity, bandpass filter, and Warble or Pulse tracer tone selector.

    The Fox & Hound™ wire tracing kit consists of a versatile Fox 2™ Tone Generator (Toner) and a high performance Hound 3™ Inductive Amplifier (Probe). The Fox 2™ is a battery operated handheld multi-function Toner that generates multiple tones (Pulse or Warble), performs some basic telephone line tests (loop mA, line polarity, and ringing voltage), provides a visual and audible continuity test, and integrates our own True Trace and TripLatch tests while providing overload protection up to 120 VAC. The Hound 3™ is a battery operated handheld lightweight Probe, with a thumbwheel Sensitivity control and Signal Strength indicator LED. It improves on previous designs with built-in LED headlights to illuminate dark areas and reduce fluorescent light noise, a bandpass filter to suppress unwanted frequencies, an earphone jack for noisy or quiet work areas, and an easy access battery cover.
    Hound 3
    • Adjustable sensitivity and loudness control
    • Bandpass Filter suppresses 60Hz and high frequency noise
    • Identifies Fox 2's tracer tone up to 12 inches away
    • Headlights illuminate dark areas and reduce fluorescent light noise
    • Built-in signal strength indicator
    • Earphone jack for use in quiet or noisy environments
    • Easy access battery door
    • Rugged, moisture resistant. Mylar cone speaker
    Fox 2
    • 3 methods of connectivity: RJ-11, RJ-45, or Alligator Clips
    • Cordless phone interface
    • High output, Warble/Pulse selectable Tracer tone
    • Convenient magnetic back for easy mounting
    • TrueTrace cadence shift for definite ID of cable or par within cable
    • Red/Green telephone lines polarity LEDs
    • Tone/Battery LED - indicates that Tracer tone is on and battery status
    • Overload protection to 120 VAC
    Fox 2
    Indication: Red LED lights to indicate presence of Loop mA in correct polarity
    Load: Approx. 13mA at 50VDC (usually less than off-hook recognition current)
    Waveform: Square Wave or Differentiated Square Wave Level
    Approx. 8Vpp (+14dBu, 600 Ohm) into an open circuit(UN-terminated cable or telephone line)
    Approx. 5Vpp (differentiated) +2dBm into a 600 Ohm load (terminated telephone line)
    Frequencies (3 types): LO - approx. 800Hz
    HI - approx. 1000Hz
    WARBLE - alternates between LO and HI
    Battery: Standard 9v Alkaline Battery
    Battery Life: 9 volt (not included) Approx 500 hours continuous
    Dimensions: 3.7"H x 2.4"W x 1.1"T
    Weight: Less than 7 ounces including battery
    Hound 3
    Detects FOX's tone up to 12 inches away
    Speaker: 1-1/2" mylar coned speaker with high strength alnico magnet is rugged and moisture resistant
    Probes: (2 provided) Solid aluminum conical probe for low resistance contact testing
    Conductive Plastic duckbill probe with metal threads for sensitive non-shorting testing
    Earphone Jack: Accepts standard 1/8" (3.5mm) mini phone plug, either mono or stereo
    Battery 9 volt (not included)
    Tone/Battery LED - indicates that Tracer tone is on and battery status
    Dimensions: 1-7/8" dia at speaker, 1-3/8" dia at body, 8-1/4" long with metal probe, 9-1/4" with conductive plastic probe
    Weight: Less than 8 ounces including battery


    In Stock, Same Business Day Shipping
    This product is in stock in our warehouse. You have a choice of Ground Service, 2nd Day Air, or Overnight Delivery for domestic orders.


    Confirm Availability using In-Store Pickup

    The most recent information shows that this
    product is in-stock at this location, but
    availability is subject to prior sale.
    Ensure availability by reserving this product
    with Free In-Store Pickup.


    Sold Out at this store location
    This product is currently sold out at this
    location. Click Change Store to see if it may
    be available for pick-up from another location.

    Show Big Images