FRYS.com | OSEPP
click image to see larger view
Frys#8353677
Frys#8353677
Frys#8353677
Frys#8353677

OSEPP IR Follower

Frys#: 8353677 Model: IRFOL-01
Price Match Request
$9.99
Special Price
Coming Soon
open box starting at $17,990.99

Overall Customer Rating

Consists of 6 IR diodes.
This IR Follower module can be used to sense infrared light as a way to guide your Arduino project.
  • 100% Arduino Compatible
  • Can be used to build a light following robot

  • Detailed Description
    (Manufacturer # IRFOL-01 )
    Features
    Pin Outs Overview
    The device has a digital and analog output for each IR diode. The analog output for each respective LED will put out a voltage from GND to VCC depending on the amount of light applied to the diode. The digital output for each respective LED will put out VCC (HIGH) if light is not detected, and GND (LOW) if light is detected.
    Calibration
    There's a trimpot in the center of the device. This trimpot is used to adjust the digital comparators. Turning this trimpot changes the point at which light is considered detected, or not detected on the digital outputs. Turning it left will make the device more sensitive (less IR light is needed to pull the digital outputs LOW). Turning it right will make the device less sensitive (more IR light is needed to pull the digital outputs HIGH). The trimpot does not effect the analog outputs.
    How to use it with the Arduino
    Connect the sensor to the Arduino using either the digital or analog outputs and apply 5V.
    Specifications
    Brand OSEPP
    Condition New
    UPC 667510001066
    10000     
    User Information
     Back to Top